2013 Nuclear Power Construction Speed ​​Up

This year, nuclear power construction is expected to accelerate. On the 5th, the National Development and Reform Commission submitted to the “Report on Implementation of the 2012 National Economic and Social Development Plan and Draft National Economic and Social Development Plan for 2013” ​​reviewed by the First Session of the 12th National People’s Congress that 2013 “accelerate the development of clean energy, The annual new hydropower installed capacity was 21 million kilowatts and nuclear power was 3.24 million kilowatts."

"The addition of 3.24 million kilowatts of nuclear power capacity means that there will be three units that may be put into production." On the 7th, Xu Chongqing, deputy director of the Energy Research Institute of Shandong Academy of Sciences, told the Economic Herald reporter.

“Equipment procurement contracts will be intensively signed in May and May.” According to a reporter from the National Nuclear Power Technology Company insider, Shandong Shidaowan Nuclear Power CAP1400 PWR project has obtained “Road”, which means that it is allowed to carry out preparatory work.

Putting Units into Operation or Up to 4 Desks According to the reporter’s observation, if two nuclear power units have been put into operation within the year according to the progress of the current project, it is clear that Unit 1 of Fujian Ningde and Unit 1 of Hongyanhe, Liaoning Province will be used.

It is understood that Ningde No. 1 unit has an installed capacity of 1 million kilowatts. It successfully entered the commissioning phase on December 28 last year. The 1 unit of Hongyanhe with an installed capacity of 1 million kilowatts was on-line on February 17 this year. . According to the plan, the two units will be put into operation within the year.

In addition to Unit 1 of Hongyanhe, there are two nuclear power plants that are expected to be network-ready this year, including Unit 1 of Guangdong Yangjiang and Unit 1 of Fuqing, Fujian.

It is understood that the Yangjiang No. 1 unit of Guangdong Province has adopted the CPR1000 (improved second-generation pressurized water reactor nuclear power technology) technology and officially started construction on December 16, 2008. On June 15 last year, Yangjiang Nuclear Power Co., Ltd. released the “Public Participation in the Environmental Impact Assessment No. 2 Announcement for the Yangjiang Nuclear Power Plant No. 1 and Unit No. 2 (Operation Phase)” mentioned that Unit 1 is scheduled to be completed on August 15, 2013. Put into production.

Fuqing No. 1 unit in Fujian Province used the second generation of improved technology to construct the first concrete tank of the reactor plant on October 22, 2008. It will be completed and put into production in November 2013 as planned.

It is worth noting that the Taishan Nuclear Power Co., Ltd., located in Guangdong, also mentioned in its public information that its Unit 1 will be put into commercial operation by the end of 2013. However, the official starting date for Unit 1 was December 21, 2009. According to the plan, the unit construction period was 52 months, and the commissioning in 2013 may be difficult to achieve.

Only Qinshan Nuclear Power Station No. 4 unit was put into operation last year.

"This year's newly added nuclear power production is the result of nuclear power construction in recent years. It is not affected by the Fukushima nuclear accident." Xu Chongqing said that the nuclear power cycle is usually about 50 months. This year's new nuclear power was added only four years ago. Planned. Since the Fukushima nuclear accident in 2011, China has suspended the approval of new nuclear power projects for one and a half years. "According to the construction cycle, new nuclear power will decrease after four years, ie around 2016."

The 8 units are expected to start. Since the executive meeting of the State Council convened on October 24 last year to restart nuclear power, by the end of last year, 4 nuclear power units had started construction, including the 4th unit in Fuqing, Zhejiang, the 4th unit in Yangjiang, Guangdong, and the nuclear temperature in Shidao Bay, Shandong. Air-cooled reactor, Tianwan Unit 3, Jiangsu.

The number of starts this year is expected to double.

According to the insider of the above-mentioned State Nuclear Power Technology Company, Shandong Nuclear Power Equipment Manufacturing Co., Ltd. is in full swing with related nuclear power companies in the consultation process, the specific equipment procurement agreement will be signed in April and May. He also said that "This year's newly started units will use the AP1000 (third-generation nuclear power technology) technology line."

The above-mentioned insiders also revealed that the CAP1400 project of Shandong Rongcheng Shidaowan has obtained the “Road” for approval to carry out the preliminary work. "However, the CAP1400 technology is relatively new. At the same time, nuclear power has a long preparation period and high complexity. The possibility of starting construction within the year is not great."

According to the Reporter’s statistics, in addition to the Shidaowan CAP1400 project, there are six nuclear power projects that are actively preparing for construction, including Unit 5 in Yangjiang, Guangdong, Unit 5 in Fuqing, Fujian, Unit 4 in Tianwan, Jiangsu, and No. 5, Hongyanhe, Liaoning. Unit, Unit 3 of Fangchenggang, Guangxi, and Unit 3 of Taishan, Guangdong.

On December 13 last year, Yangjiang Nuclear Power Co., Ltd. issued the “public information participation announcement No. 1 for environmental impact assessment of Units 5 and 6 of the Yangjiang Nuclear Power Plant”, which mentioned that “Units 5 and 6 are scheduled to start construction in 2013. Completed in 2017."

Fuqing Nuclear Power Co., Ltd. is a planning and phased construction of six million-kilowatt PWR nuclear power plants. Its No.1, No.2 and No.3 units started construction in October 2008, June 2009 and December 2010, respectively. Its No. 4 unit was postponed until November 2012 due to the Fukushima nuclear accident. According to the 8-10 month interval cycle and past practice, Fuqing Unit 5 is expected to open at the end of the year.

According to the "Environmental Impact Assessment Information Announcement for Design Units 3 and 4 of Tianwan Nuclear Power Station Expansion Project" issued by Jiangsu Nuclear Power Co., Ltd., the two units were started at intervals of 10 months. Its Unit 3 was started in December last year, which means that the planned Unit 4 will be built by the end of the year.

Hongyanhe Unit 5, Guangxi Fangchenggang Unit 3 and Guangdong Taishan Unit 3 were originally scheduled to start in March 2011, April 2011 and September 2011, respectively, but were delayed due to the Fukushima nuclear accident and other factors. Today, after the restart of nuclear power construction, the commencement of these coastal nuclear power projects has also been put on the agenda one after another.

In addition to the above-mentioned expansion of the nuclear power plant, the new nuclear power plant is also expected to officially start, Guangdong Lufeng nuclear power is one of them. It is reported that as early as December 27, 2010, Lu Feng nuclear power to get the "road" of the first phase of the project. After the Fukushima nuclear accident occurred, the project ran aground. According to the conditions for the State Council to restart nuclear power construction, the site is located in the coastal area and meets the three-generation safety standards. Lufeng can meet the requirements, and the release may be relatively large.

“In addition to these seven units, it is also possible to start the Liaoning Xudabao nuclear power project.” The insider told the Herald reporter that in order to reduce losses, part of the equipment of the Xu Dabao nuclear power project was from the previously suspended Hunan Taohua River. Nuclear power project transferred from.

On October 24 last year, the “Energy Policy of China (2012)” issued by the State Council Information Office mentioned that China has “put into operation 15 nuclear power units with an installed capacity of 12.54 million kilowatts and 26 units under construction with an installed capacity of 29.24 million kilowatts. , the scale of construction is ranked first in the world." According to the preliminary statistics of the Herald reporter, at the end of this year, the number of operational units is expected to reach 19, and the number of units under construction will reach 34.