Error Analysis of Indoor and Outdoor Long-range Test of LED Street Light Characteristics

1 Introduction

In recent years, LED light source has been recognized and valued by its high efficiency, longevity and environmental protection. At the same time, with the rapid development of LED technology in the past 10 years, the related secondary optical design technology of LED has become more and more mature, and the existing semiconductor light source has been used to replace the existing one. Urban road lighting sources have become a major trend in the field of semiconductor lighting , and have received increasing attention. However, in order to promote LED street lamps in a large amount, it is necessary to have a unified technical standard and measurement standard for LED street lamp products, and stipulate some mandatory performance indicators to ensure the performance and quality of the products. From the current status quo of LED street lamp product technology development, the most important ones are the whole lamp life, the whole lighting effect and the light decay curve.

LED street light as a system, many factors affecting the above performance, such as the characteristics of the power drive, the weather resistance of the optical components, the waterproof and dustproof performance of the whole lamp structure, etc. will seriously affect the light efficiency and life of the system, that is, the LED for light The optical characteristics of the chip or module do not fully describe the performance of the luminaire. Therefore, the aging test of the whole lamp must be performed to obtain data that meets the actual performance of the system.

As the LED street lamp for outdoor lighting products, the reliability must be carried out in the long-term test on site. The time span often takes thousands of hours, and the accuracy of the long-range measurement on the site is affected by environmental and test methods, and it will be compared with the indoor experiment. The test results of the room environment produce large differences.

Figure (1) compares the light fading results of different LED street lights provided by a number of companies organized by the inspection department in the laboratory environment and in outdoor venues.

LED street light in the laboratory environment compared to the light decay test in outdoor venues

Figure (1) shows the data of the light decay test of the 22 LED street lamp products for 2000 hours. It can be seen from the figure:

A. The light decay value of the LED street lamp tested in the outdoor field is greater than the light decay value tested in the laboratory environment;

B. If it is based on laboratory tests, most of the light decay is below 5%, and if it is based on outdoor tests, the light decay of these street lamps is obviously too large, and it is not suitable for mass production;

C. The test difference corresponding to different street lamp products is also different, ranging from 5% to 15%.

This has caused difficulties for the end user to choose LED street light products, that is, what method should be used to detect, which group of test data should I believe?

At present, in all the standards and normative indicators related to LED street lamps at all levels, strict requirements are imposed on the light decay of LED street lamps. Basically, it is required to continuously illuminate for 3000 hours, and the road lighting fade is not higher than 2%; High light fading tests require that all types of critical factors that cause measurement errors must be analyzed and appropriately compensated.

It uses professional Amplifier Speaker .Passive Speaker.Super bass box to transmit your house to a AV Home Theater .it support all kinds AUDIO/VIDEO Source,you can connect your USB/SD/DVD/TV to watching any program you are interested.there is a mic port in the Power Amplifier ,if you want to sing ,you can connect your Microphone,it is unnecessary for you to go out ,you just need to open your AV Home Theater Speaker,then you can totally relax yourselves at home.

Model No:AV-3601

Power(RMS):150W*2+20W*2+30W+100W

Speaker Units:6.5"*6+1`*2(main)

            4`*2+1(central)

            4`*2+1`*2(surround)

            10`(Subwoofer)

AV Home Theater Speaker

AV Home Theater Speaker,Amplifier Speaker,Passive Speaker,Passive Line Array Speaker

Guangzhou J.SUN Electronics Co., Ltd. , http://www.jsunaudio.com

Posted on