Discussion and practice on the installation method of LED pixel point light source

Since the 2008 Beijing Olympic Games, LED pixel point light source has been applied to the lighting of various venues, LED pixel point light source gradually entered our field of vision, and then was widely promoted; even in the 2010 Guangzhou Asian Games, a small waist, The guangzhou logo at the entrance of the main media center has left a profound impression on the world;

Regarding the installation of point light sources, although various manufacturers have gone through various discussions and practices, they have not conducted a comprehensive summary analysis; taking this opportunity, our company has shared the rich experience of engineering application practice over the years and shared the hope with everyone. The engineering design can provide a relatively complete and comprehensive selection reference; it can provide reference for engineering companies to improve efficiency in engineering construction.

Below we analyze the advantages and disadvantages of each pair of installation methods:

1. Snap screw installation: The buckle is locked on the wall, and then the luminaire is snapped into the buckle (the advantages and disadvantages of this installation method);

2, the buckle is glued and installed: the user glues the glue outside the installation to the wall, and then the lamp is stuck into the buckle (the advantages and disadvantages of this installation method);

3, the buckle pull wire installation: the buckle snaps into the wire, then the lamp snaps into the buckle (the advantages and disadvantages of this installation method);

4. Profile lock bracket installation 1): The two mounting brackets are locked on the wall surface according to the distance, and the fixture is locked on the aluminum profile with screws, and then the profile of the lock fixture is locked on the mounting bracket (this installation method is excellent) Disadvantages);

Profile lock bracket installation 2): The two mounting brackets are locked on the wall surface according to the spacing, and the buckles are attached to the aluminum profile of the lamp, and then the profile of the fixed fixture is locked on the mounting bracket (the advantages and disadvantages of this installation method);

Profile lock bracket installation 3): The two mounting brackets are locked on the wall surface according to the distance, and the fixture with the lamp cover is screwed onto the aluminum profile, and then the profile of the fixed fixture is locked on the mounting bracket (this installation method is excellent) Disadvantages);

5, profile lock wall surface installation 1): use the screw to lock the lamp on the aluminum profile, and then lock the profile of the fixture to the installation wall (this installation method advantages and disadvantages);

Profile lock wall installation 2): Use the connection buckle bar lamp card aluminum profile, and then lock the profile of the fixed fixture on the installation wall surface (the advantages and disadvantages of this installation method);

Profile lock wall installation 3): Use a lamp with a lamp cover to screw the aluminum profile, and then lock the profile of the fixed fixture on the installation wall (the advantages and disadvantages of this installation method);

6. For non-planar installations, such as diagonally-drawn large-diameter steel cables on bridges, they can be installed in the form of hoops: first lock the hoops to the large-diameter steel cables, and then lock the aluminum profiles with the lamps to the hoops. Can be on (the advantages and disadvantages of this installation method);

7. Other installation methods can be separately developed and designed according to actual engineering needs;