Announcement of Bidding Project for Liquid Ammonia Procurement Project of Denitrification System of Inner Mongolia Shangdu Second Power Generation Co., Ltd.

Announcement of Bidding Project for Liquid Ammonia Procurement Project of Denitrification System of Inner Mongolia Shangdu Second Power Generation Co., Ltd.

The tender number: SDFD-2016-138

First, the tender conditions

Under the entrustment of Inner Mongolia Shangdu Second Power Generation Co., Ltd., it was responsible for organizing the bidding for the liquid ammonia procurement project of the denitrification system of Shangdu Second Power Generation Co., Ltd., Inner Mongolia. The project was conducted through open tendering. The specific tendering issues were announced as follows:

Second, the scope of the tender:

1. Bidding scope: Supply of liquid ammonia to the denitrification system of Inner Mongolia Shangdu Second Power Generation Co., Ltd.

2. Technical requirements:

(1) liquid ammonia performance: colorless liquid, corrosive and volatile, with a strong irritating odor, easily gasified into gaseous ammonia. The density 0.617g/cm3, boiling point -33.5 °C, lower than -77.7 °C can become odorless colorless crystals.

(2) The liquid ammonia component should meet the requirements of GB 536-88, ammonia content ≥ 99.96%, residue content ≤ 0.1%, moisture content ≤ 0.1 %, oil content ≤ 5 mg/kg (gravimetric), iron content ≤ 1 mg /kg.

(3) Liquid ammonia is transported in a special tanker, and full-time drivers (at least two) are responsible; liquid ammonia leakage and other consequences arising from tanker, traffic and other issues are the responsibility of the bidders; valves and valves for transport tankers Attachments meet the relevant national standards and can be used in conjunction with the tendering site's on-site unloading ammonia pipeline fittings. No unmatched phenomenon should occur. Otherwise, the bidders will replace them on their own, and all costs incurred will be borne by the bidders, and the bidders will be responsible for unloading the goods.

(4) The bidder must provide each batch of liquid ammonia test report and production certificate to ensure the quality of the supplied liquid ammonia. Due to the quality of the bidder’s products, the efficiency of denitrification is low or the equipment is damaged. The bidder shall bear the corresponding responsibility and compensate for the losses caused by the tenderer.

(5) The bid solicitor has the right to conduct random inspections on every batch of products sent, random sample tests, and the costs for sending to third parties for inspection shall be borne by the bidders (third parties designated by the tenderer), such as product quality, performance and technology The specifications or related standards do not match. The bid solicitor has the right to refuse the acceptance. The bidder is responsible for free replacement (see technical specifications for details).

3. Parameter: 600 tons of supply (purity ≥ 99.96%, according to the actual settlement)

4. Place of delivery: Inner Mongolia Shangdu No. 2 Power Generation Co., Ltd. Ammonia zone, assisted by the supplier to unload the goods to the place requested by Party A.

Third, the bid registration requirements:

(a) Registration requirements:

1. The bidder must have the qualification of an independent legal entity of the People's Republic of China, as well as the ability to independently assume civil liability and the equipment and professional and technical capabilities necessary to perform the contract.

2. The bidder had not less than 3 similar project achievements in the past 3 years. (The contract based on the name of the bidder and the owner/user is used as the basis, and the contract must include: the project name, the main content of the contract, the signing of the contract, the signing time of the contract, and other key contents, otherwise it will not be adopted).

3. Others: The bidder should not perform the contract and the bad records of safety and civility, no bad litigation records, and no records of violation punishment in the bidding and bidding activities.

4. The scope of business must include the qualification for the production or sale of the bid.

5. The Commonwealth does not accept bids from the Consortium.

6. The bidder must have the road transportation business license qualification (dangerous goods category) or commissioned transportation contract.

7, hazardous chemicals business license.

8, the bidder must have the original factory agent authorization. (Provided by agents and agent manufacturers)

(b) Registration information to be submitted for bid registration:

(1) The original power of the company's legal representative's power of attorney for the project (authorized person must be the responsible person for the project);

(2) A copy of the business license of the bidder's company (if the bidder's business license, organization code, tax registration certificate have been combined for the three certificates, the bidder only needs to provide a valid copy of the company's business license);

(3) A copy of the bidder's organization code certificate (must be within the validity period);

(4) Copy of the bidder's tax registration certificate;

(5) 3 similar project performances (based on the contract signed with the owner/user with the name of the bidder, and the contract must include: the project name, the main content of the contract, the signing of the contract, the time of signing the contract, etc. , otherwise it will not be adopted);

(6) The bidder must have the road transportation business license qualification (dangerous goods category) or commissioned transportation contract.

(7) Dangerous chemicals business license.

(8) The original manufacturer's agent authorization original. (Provided by agents and agent manufacturers)

The bidder is required to provide the original (1)-(8) of the above-mentioned documents at the time of registration. The original can be returned after passing the bid, and the applicant may participate in the bid registration and provide a copy of the above-mentioned (1)-(6) documents with official seals (A4 Two copies of paper binding book) and one copy of electronic version (original scanned copy provided in the form of USB flash drive). Incomplete applicants will be refused registration.

Sixth, the time and place of selling the tender documents:

1. Time: From November 14th, 2016 to November 18th, 2016, every working day from 9:00 to 11:30, and from 14:30 to 17:00 (excluding holidays).

2. Location: Inner Mongolia

3. Selling price: The price of this bidding document is RMB 500, which will not be refunded after sale.

If the bidder uses the form of transfer to pay the tender fee when buying the bid, the bidder must indicate the company name in the column of the transfer postscript. If the bidder is not responsible for all the consequences caused by the labeling, the company will not be responsible when selling the bid. Third-party software payment (such as Alipay payment software, etc.) All the consequences resulting from this company has nothing to do with the company, if the bidder has about the tender item target book fee and bid security deposit invoices and related issues, please contact.

Deadline for submission of bid documents, opening time and location

1. Deadline for submission of bid documents and opening time: 10:00 am on December 6, 2016 (Beijing time);

2. Location: Inner Mongolia

Contact: Qian Yong

Mobile:

phone

fax

E-mail:

In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.

L9 Connector

L9 Cable Mount Connectors,L9 Bulkhead Mount Connectors,L9 Flange Mount Connectors,L9 PCB Mount Connectors

Xi'an KNT Scien-tech Co., Ltd , https://www.honorconnector.com

Posted on