Half a century acoustic crystal KEF first headset M500 out of the box

do not doubt! You didn't read it wrong. KEF, which was originally only a speaker, also launched headphones. Let's take a look at the box!
Half century of acoustic crystallization KEF's first headset M500 debut
Half century of acoustic crystallization KEF's first headset M500 debut
The panel can also be opened to see the technical data and the explosion map inside. The whole package is the level of quality.
Half century of acoustic crystallization KEF's first headset M500 debut
Behind it is the characteristics of the M500.
Half century of acoustic crystallization KEF's first headset M500 debut
The inner box is drawn out and fully complies with KEF's strategy of boutique marketing in recent years.
Half century of acoustic crystallization KEF's first headset M500 debut
Open the inner box like a jewel case, you can see the M500's take-away storage box.... Is it necessary to have such a layered package? Haha~ Did you notice? From the inside out, all are black in appearance, making the M500 even more unparalleled sense of nobility.
Half century of acoustic crystallization KEF's first headset M500 debut
Open the storage box, the texture is also a great! The M500 is just inside, and there is space to put accessories.
Half century of acoustic crystallization KEF's first headset M500 debut
In addition to the standard headphone cable, there is also a dedicated line for iPhone/iPad, a small adapter, and a special adapter for flying, so you can use the M500 everywhere.
Half century of acoustic crystallization KEF's first headset M500 debut
This long line trial is dedicated to the iPhone/iPad with volume and answer buttons. From this picture, we can see that the KEF wire is all flat design, the advantage is not easy to damage, and the durability is high.
Half century of acoustic crystallization KEF's first headset M500 debut
Foldable design for easy storage. The small hole above is used for the external earphone cable.
Half century of acoustic crystallization KEF's first headset M500 debut
The deity appeared, the M500 line is simple, but KEF is the design essence of the old factory of more than half a century.
Half century of acoustic crystallization KEF's first headset M500 debut
The earmuffs are made of high-grade faux leather that is very comfortable to wear and compact.
Half century of acoustic crystallization KEF's first headset M500 debut
The outer layer of the earphone is covered with high-grade artificial leather, which is really advanced. Watch out for Luo! This earpiece is not fixed, but can be rotated. This design makes the M500 more adaptable.
Half century of acoustic crystallization KEF's first headset M500 debut
This is the way the headband is pulled to the maximum, and the head is no longer afraid to wear it. Moreover, the damping of the M500 headband is very large, and it takes a little effort to pull it. This is the correct design, because it will not loosen the span and always fix the headband. The headband is made of the same high-grade artificial leather as the earmuffs.
Half century of acoustic crystallization KEF's first headset M500 debut
The entire earphone bracket is made of aluminum alloy and has a reinforced structure to handle long-term and intense use.
Half century of acoustic crystallization KEF's first headset M500 debut
The M500 is the second step for KEF to welcome to New Media. The first product is the active speaker X300A with integrated USB transmission. In KEF's planning, "new media" represents a new way of enjoying music with computers, and it is also a new direction for them to directly face the young Philharmonic group.
Half century of acoustic crystallization KEF's first headset M500 debut
The M500 uses a 40 mm neodymium magnet unit. The voice coil uses a light-weight, high-efficiency copper-clad aluminum coil. In addition to fully reproducing the audio, it accurately represents the details and dynamics of the music. Since it is "new media", the M500's support for smart phones, tablets and portable players is even more complete. If Apple's iPhone, iPad or iPod, it can be voice-activated with a dedicated microphone.
Half century of acoustic crystallization KEF's first headset M500 debut
KEF M500 Specifications
Use monomer: 40mm full-range moving coil monomer. Frequency response: 20Hz~20kHz. Sensitivity: 103 dB ± 4 dB (IEC-318 at 1 KHz). Impedance: 32 ± 15% Ohm. Maximum input sound pressure: 30mW. Noise attenuation: -20dB. Line length: 1.3m. Connector: 2.5/3.5mm. Weight: 222 grams.

A PVC Insulated Power Cable is a electric cable with flexible copper or aluminum conductor ,PVC insulation and PVC sheath. For some special application like for direct burial or for exposed installation, protective jacket of steel tape or wire is also necessary. The shape of PVC insulated Power Cable may be round or flat.  Some PVC cables may select flame retardant material sheath for fire safety consideration.

 

Product Features

l  Widely used to transmit and distribute electrical power in low voltage circuit.

l  Choices of conductor& jacket material to suit the requiring applications.

l  Armor material options to provide high flexibility and excellent mechanical protection

PVC insulation and sheath power cables

Using features

Max. permissible continuous operating temperature of conductor: 70℃.

Max. temperature of conductor during short-circuit(5s maximum duration) shall not exceed: 
Cross-section of conductor ≤300 square mm: 160℃;
Cross-section of conductor >300 square mm: 140℃. 

l  The ambient temperature under installation should not below 0℃.

 multicore electrical PVC power cables

Application

l  Non-armored  type is unable to bear external mechanical force for laying indoors, in tunnel or pipe.

l  Steel tape armored (STA) type is able to bear external mechanical force but unable to bear large tension for laying indoors, in tunnel or pipe.

l  Steel wire armored (SWA) type is able to bear external mechanical force and certain tension while apply for laying in high drop are.

 1.5 to 630 sq mm PVC power cablespvc insulated power cables

FAQ

 

Q: Are you a factory or trading company? 
A : We are a manufacturer. We are professional in developing and producing electrical wires and cables since 2001.

 

Q: Can I visit your factory? 

A :Yes!  You are welcome to visit our factory for further detail check.

Our factory is located in Minqing,Fujian.You could choose to fly to Xiamen/Fuzhou International airport. And tell us your flight No. We will arrange to pick you up if you like.

 

Q: May I buy samples from you? 

A: Yes! You are welcome to place sample order to test our superior quality and services.

 

 

Q: Can you put my brand name (logo) on these products?

A: Yes! Our factory accepts to print your logo on the products.

 

Q: May I know the status of my order?

A: Yes .The order information and photos at different production stage of your order will be sent to you and the information will be updated in time.

 

We would like to offer you professional cable solutions to your particular requirement. And OEM service is available based on official and legal authorization. Please do not hesitate to contact us for more details.

PVC Insulated And Sheathed Power Cable

PVC Insulated And Sheathed Power Cable,Insulating Electric Power Cables,PVC Sheathed Power Cables,Al PVC Jacket Electric Cable

Fujian Lien Technology Co.,Ltd , http://www.liencable.com

Posted on